Safe Crossing. Self-propelled MEWPs must always be transported on a trailer or vehicle across rail tracks.

Retract extension decks before lowering. Check all four corners are clear of obstructions before you lower the platform.

Don’t get hit at height! Never elevate the platform if there is a risk of being hit by other equipment.

Never elevate the platform occupants from the ground controls. There is an increased risk of crushing/entrapment if you elevate people from the ground control position.

Don’t forget to report all accidents and near misses involving powered access into the IPAF Accident Reporting Portal or report anonymously through IPAF’s ePAL app.

Conduct a pre-use inspection and make sure the MEWP is safe to use before starting work.

Before setting up a MEWP on a road have in place a traffic management plan and an exclusion zone.

Don’t operate a MEWP when there is a risk of lightning. Seek proper shelter and wait until the storm passes.

Don’t Overload the Platform. Overloaded platforms can become unstable, always understand the machine limits before operating. Distribute the load evenly to prevent overturns.

Understand the ground conditions before operating

Always be aware and avoid crush hazards when moving the platform.

Prevent objects falling from the platform. Be aware that unsecured tools and materials can fall from platforms.

Stay safe when working around antennas. You are at risk from non-ionising radiation (RF) from transmitting antennas. Always make sure they are isolated and you have a permit to work.

Be careful of the catapult effect on uneven ground.

You do not need to touch the power cables to be electrocuted – electricity can jump!

Position your MEWP correctly and always stay inside the platform guardrails with both feet on the platform floor

Do you operate MEWPs near roads? Always work safely and set up an exclusion zone to protect the boom from entering a live road.

Are your MEWP tyres safe to use?

Always check the condition of your tyres and wheels as part of your pre-use inspection.

Do you have a rescue plan? Always have a rescue plan in place for mast climbing work platforms (MCWPs) and construction hoists.

Don’t overload the hoist. Stay within the hoist rated capacity and observe the limits of the machine.

Don't fall for it! Position your MEWP correctly and always stay inside the platform guardrails with both feet on the platform floor.

Are you servicing the MEWP safely when on-site? Servicing MEWPs on-site can create higher risks than workshop servicing.