This webinar explores how Mast Climbing Work Platforms (MCWPs) are revolutionising safety and productivity in challenging projects. Industry experts shares insights, best practices, and real-world case studies to showcase the potential of MCWPs.
The mobile elevating work platform (MEWP) may be significantly different than the MEWP the operator was trained on, even if the MEWP is of the same group and manufacturer.
One of the key conditions for MEWP stability is the ability of the ground or structure to safely support the weight of the MEWP at its point of contact with the ground in all configurations. Failure to consider the load-bearing capacity of the ground could potentially cause the MEWP to go out of level, become unstable, and overturn.
The mobile elevating work platform (MEWP) may be significantly different than the MEWP the operator was trained on, even if the MEWP is of the same group and manufacturer.
Mobile elevating work platforms (MEWPs) are not advertising displays. MEWPs are designed to take persons, tools and equipment within the platform to enable the occupants to work safely at height. Attaching a sign or banner to a MEWP will potentially make the MEWP unstable. This can cause an overturn and result in serious injuries to people and damage to property.
Mobile elevating work platforms (MEWPs) can be used in confined areas, or near overhead structures. When travelling or when elevated there is a risk that the operator or the platform occupant may come in contact with an overhead obstruction. This could result in crushing or entrapment of that person.
Ground conditions are critical for the stability of the mobile elevating work platform (MEWP). Unsuitable ground conditions can result in the MEWP overturning with potential loss of life.
A mobile elevating work platform (MEWP) must be inspected daily or at the start of each shift to make sure it is: safe to use and will not cause an injury to the platform occupants or other personnel.
To comply with regional legislation, standards, and best practice, a Rescue Plan should be developed, documented, and communicated before anyone operates a MEWP.
This Toolbox Talk provides information on the associated hazards and risks involved with mobile elevating work platforms (MEWPs) working near railways and crossing active and non-active rail crossings.
Mobile Elevating Work Platforms (MEWPs) are supplied with both ground and platform controls to comply with International MEWP design standards. Manufacturer’s operators’ manuals identify that the primary operator control station is in the platform and that the ground controls should only be used to carry out pre-use inspections without anyone in the platform, or for emergency descent purposes as part of a rescue plan.
Mobile Elevating Work Platforms (MEWPs) are provided with ground and platform controls to comply with global MEWP design standards. Pedestrian control is the term used when the MEWP operator uses the platform controls from the ground by walking alongside, or in close proximity to the MEWP. This includes those that have an umbilical cord, or radio/remote, or a fixed point of control on the chassis.
This Toolbox Talk provides guidance for powered access rental companies on how to deal with suspected asbestos contaminated equipment when it is off-hired.
Mobile Elevating Work Platforms (MEWPs) should not be used if there is a risk of lightning. If lightning strikes a MEWP it will look for the path of least resistance to earth. This means it can travel from the platform, through the superstructure and tyres to earth. Rubber tyres do not insulate MEWPs.
There is a requirement for all lifting equipment, including Mobile Elevating Work Platforms (MEWPs), to specify maximum capacity limits. For MEWPs, this is the safe working load (SWL) which is expressed in kilograms or pounds and includes the maximum number of people allowed in the platform. An overload is the intentional, or accidental, exceeding of these limits.
When working in a Mobile Elevating Work Platform (MEWP) at height, you must be aware of the risk of tools, materials and equipment falling from the platform with the potential to injure people working at ground level. It is essential that any items likely to fall are properly secured within the envelope of the platform’s guardrails.
If a MEWP (Mobile Elevating Work Platform) or platform occupant contacts energized power lines it can cause, electrocution, electric shock, fire, or an explosion. The same effects can occur without contacting a power line by arcing or flashover of electrical energy to a conductor.
RF is short for radio frequency. RF is any frequency within the electromagnetic spectrum associated with radio wave propagation. When an RF current is supplied to an antenna, an electromagnetic field is created that is able to travel, or spread through space.
Operating MEWPs alongside roads can cause death or serious injury to operators or members of the public if the tasks are not adequately planned and machinery not positioned correctly. Due to the close working environment and proximity with other equipment, passing vehicles, buildings and pedestrians, the risk of a MEWP being impacted is significantly increased.
Tires on Mobile Elevating Work Platforms (MEWPs) can sometimes be the only contact points between the MEWP structure and the ground and are critical to the stability of the MEWP.
The tires, whether solid, air filled or polyurethane foam-filled support the weight of the machine while it is in use. In certain boom configurations this can be up to 80% of the total machine weight over one tire.
Quickly rescuing someone who has become trapped at height can make a very significant difference to the injuries sustained – it may be the difference between life and death.
The loading of people and materials is critical to the safe operation of hoists. Unsecured loading could have an adverse effect and lead to serious injury or death of personnel. This TBT provides information on loading hoists correctly.
Mobile Elevating Work Platforms (MEWPs), are a safe and effective means of access for undertaking temporary work at height tasks. It is important to remember a MEWP is only as safe as the person who is operating it. If this equipment is used incorrectly, unsafely or by inexperienced people, accidents and fatalities are more likely to happen.
This Toolbox Talk provides some safety measures which can reduce the risk of falls from the platform.
The loading of people and equipment is one of the critical tasks during the operation of MCWP’s. Inappropriate loading, overloading or unsecured loads will have an adverse effect on the platform and could lead to serious injury or death of personnel. This Toolbox Talk provides information on the correct loading of MCWP’s.
MEWP overturn incidents often result in serious injuries or fatalities. Instability leading to overturn is commonly among the top four causes of lost time incidents (LTIs) annually, according to global data.
