The purpose of this guidance is to develop a standard approach to the generation and circulation of safety alerts in the MEWP industry.

Mast Climbing Work Platform (MCWP) Handover Certificate

Mast Climbing Work Platform (MCWP) Load Chart

Have you been familiarised? Familiarisation prevents incorrect use.

Check your MEWP! Conduct a pre-use check to make sure the MEWP is safe to use before starting work.

Normal and auxiliary control systems built into a mobile elevating work platform (MEWP) will allow the operator to bring the platform of the machine safely to ground level under controlled conditions. It is extremely unusual not to be able to lower the platform using these controls or for all of these systems to fail. The following is an example of a rescue plan for people who work at height using a MEWP.

It is essential that MEWPs are secured and managed correctly to ensure that only competent and nominated personnel operate the equipment in accordance with the employer’s safe system of work. All MEWPs should be stored in a safe and secure manner when left unattended.

This guidance is intended to assist companies to demonstrate the independence, impartiality and integrity of the 2nd party inspection/examination bodies that they employ.

Scissor lifts are not designed to hold banners. Attaching banners to a scissor lift will increase the surface area and create a "sail board” effect which will destabilize or potentially turn over a MEWP.

The following guidance is intended to help employers differentiate between the possible options available when considering the selection of appropriate equipment where the increased risk of entrapment has been identified.

This document outlines a major inspection scheme to validate structural integrity and functionality of critical components of a mobile elevating work platform (MEWP). Such a scheme may be undertaken to determine if a machine is within safe design and use criteria beyond the manufacturer’s design life. Design life is defined as the duration determined by the manufacturer for which a structure or a structural component may be used for its intended purpose with recommended maintenance.

Beware of falling objects. Organise a drop zone clear of the MEWP base.

This publication gives guidance to the organisation that has control of the planning, management and use of the MEWP on-site.

Do not jump out of the platform. Always enter and exit the platform using three points of contact.

Danger keep well clear. When using pedestrian controls stand clear of the MEWP and return back to the platform when safe.

Caution with guardrails. Be careful not to trap your fingers when lowering or raising guardrails.

Setting up on a slope? Outriggers and spreader pads must be on level and stable ground.

Prevent unauthorised use. After use, always leave the MEWP in a safe and secure place and remove the key.

Keep clear of cables. You do not need to touch the power cables to be electrocuted – electricity can jump!

Overhead obstructions. Always be aware of your surroundings and identify crush hazards when moving the platform.

Register pre-owned MEWPs. Make sure you register with the MEWP manufacturer to get safety alerts and product updates.

Correct MEWP selection. Always use the right MEWP for the job.