The purpose of this document is to provide information, and good-practice guidance on means of reducing exposure to trapping and crushing hazards while using a MEWP.
The mobile elevating work platform (MEWP) may be significantly different than the MEWP the operator was trained on. Accidents can occur from operating an unfamiliar MEWP, for example by moving the platform in the opposite direction than intended, or by incorrectly setting up the outriggers.
One of the key conditions for MEWP stability is the ability of the ground or structure to safely support the weight of the MEWP at its point of contact with the ground in all configurations. Failure to consider the load-bearing capacity of the ground could potentially cause the MEWP to go out of level, become unstable, and overturn.
The IPAF Operators’ Safety Guide for Mobile Elevating Work Platforms is a pocket-size publication that sets out the recommended working practices for the safe operation of MEWPs over a wide range of applications, from initial checks, through transport and positioning on site, to carrying out the required tasks.
Mobile elevating work platforms (MEWPs) are specifically designed to lift people to a position where they can work at height safely within the platform. MEWPs are not designed to transfer people from one level to another, or for people to exit the platform at height.
Raising the Standard is the IPAF bulletin. It is published twice a year and carries news of particular interest to IPAF members, such as developments in legislation and technical standards, and new member services.
Scissor lifts are not designed to hold banners. Attaching banners to a scissor lift will increase the surface area and create a "sail board” effect which will destabilize or potentially turn over a MEWP.
Normal and auxiliary control systems built into a mobile elevating work platform (MEWP) will allow the operator to bring the platform of the machine safely to ground level under controlled conditions. It is extremely unusual not to be able to lower the platform using these controls or for all of these systems to fail. The following is an example of a rescue plan for people who work at height using a MEWP.
In consultation with manufacturers, contractors, rental companies and other interested parties, IPAF has produced this good practice guide listing some of the key points that should be taken into consideration by rental companies and their customers when managing any type of Mobile Elevating Work Platform (MEWP).
It is essential that MEWPs are secured and managed correctly to ensure that only competent and nominated personnel operate the equipment in accordance with the employer’s safe system of work. All MEWPs should be stored in a safe and secure manner when left unattended.
This guidance is intended to assist companies to demonstrate the independence, impartiality and integrity of the 2nd party inspection/examination bodies that they employ.
This document outlines a major inspection scheme to validate structural integrity and functionality of critical components of a mobile elevating work platform (MEWP). Such a scheme may be undertaken to determine if a machine is within safe design and use criteria beyond the manufacturer’s design life. Design life is defined as the duration determined by the manufacturer for which a structure or a structural component may be used for its intended purpose with recommended maintenance.
MEWP overturn incidents often result in serious injuries or fatalities. Instability leading to overturn is commonly among the top four causes of lost time incidents (LTIs) annually, according to global data.
